Penetrating Waterproofing Sealer with a Clear, Low-Gloss Finish
Premium Brick Sealer, Paver Sealer, and Concrete Sealer with Long-Lasting Protection and Subtle Sheen.
Protect, waterproof, and enhance your masonry surfaces with LastiSeal Satin, a clear, penetrating waterproofing sealer specifically formulated for brick walls, paver surfaces, concrete floors, and other porous masonry. This professional-grade sealer penetrates deeply, up to 4 inches into the substrate, where it chemically bonds within the pores and capillaries to waterproof and strengthen the material from the inside out. Unlike traditional surface coatings that cure on the surface, LastiSeal forms a durable, internal barrier that won’t wear away. At the same time, specially added acrylic polymers remain near the surface, leaving behind a subtle, low-gloss satin sheen that gently enhances the color and appearance of the masonry without forming a slippery or overly shiny film.
✅ 15-Year Waterproofing Warranty
Get long-term protection with LastiSeal. While the internal waterproofing and strengthening lasts up to 15 years, the satin sheen on the surface is not permanent and will gradually fade due to weathering and surface traffic, especially in high-use areas. However, once the sheen has worn, the appearance can be easily refreshed with a light spritzing application of LastiSeal Satin, restoring the subtle enhancement without compromising the underlying protection.
LastiSeal outperforms traditional sealers, lasting twice as long as silane/siloxane products and up to ten times longer than acrylic sealers. It’s ideal for both residential and commercial applications, including:
- Brick Walls & Chimneys
- Concrete Patios & Driveways
- Garage Floors & Basement Slabs
- Pool Decks, Fireplaces
- Decorative Pavers & Porous Stone Surfaces
🛡️ Advanced Masonry Protection + Low-Gloss Sheen
- Deep Penetrating Sealer – Fills pores, fractures, and capillaries to internally seal and strengthen concrete, brick, and pavers.
- Low-Gloss, Satin Finish – Cures with a subtle satin sheen. Ideal for homeowners seeking a clear masonry sealer that not only protects but also gently enhances the surface with a refined, low-gloss finish.
- Efflorescence & Dusting Control – Helps prevent common issues like white mineral deposits on brick and dusting concrete.
🌿 Safe, Eco-Friendly Formula
- Water-Based, Low-VOC – Free of added solvents. Non-toxic, non-flammable, and non-corrosive. Safe for use around people, pets, and plants.
- California VOC Compliant – Meets California’s strict low-VOC regulations for environmental safety.
- Indoor and Outdoor Use – Odorless and non-flammable, ideal for chimney sealing, fireplace sealing, pool-deck sealing, garage floors, driveways, mudrooms, patios, and basements.
🧱 Ideal for Use On:
- Brick Sealer – Walls, chimneys, veneers, brick homes, historical applications.
- Concrete Sealer – Garage floors, driveways, foundations.
- Paver Sealer – Walkways, patios, pool decks, driveways.
- Fireplace Sealer – Interior or exterior porous masonry; bricks, stone.
- Chimney Sealer – Brick, block, or stone
- Other Porous Surfaces – Limestone, stucco, sandstone, concrete blocks.
💪 Built for Harsh Conditions
- Reduces cracking from freeze-thaw cycles.
- Resists salt damage and chemical spills.
- Prevents surface deterioration and spalling.
- UV Resistant – Formulated to resist UV degradation and prevent fading or breakdown from sun exposure. Non-yellowing for a clear, long-lasting finish that maintains the natural look of your masonry over time.
- Breathable – Allows moisture vapor to escape (won’t trap water or peel).
- Long-lasting = fewer reapplications, lower maintenance cost.
- Helps repel dirt, grime, grease, and chemical spills by blocking surface pores, making cleanup faster and easier.
LastiSeal Satin is your all-in-one solution for a low-gloss, clear concrete sealer, brick sealer, paver sealer, chimney sealer, and fireplace sealer. Whether you’re protecting and waterproofing brick walls, beautifying paver surfaces, or preventing efflorescence and dusting concrete, LastiSeal delivers unmatched performance and durability.
Need Help with Your Project? Our knowledgeable technical support team is just a phone call or email away. We’re here to help you get the job done right.
Fast Shipping: Most orders received by 2:00 PM EST ship the same business day via Ground Delivery. Delivery typically takes 1–3 business days to the East Coast and Central states, and 3–5 business days to West Coast destinations.